DA0X3CMBAF0 – HP TPN-Q250

The HP TPN-Q250 is built on the DA0X3CMBAF0 board designed by Quanta. The catalog lists 2 files for it: 2 BIOS files and 1 EC firmware image.

Revisions seen in file names: F. First posted in September 2022 in BIOS Archive.

BIOS dumps 2

FileSizeRevAddedSource
13.6 MB
F
Get on Telegram BIOS Archive

Board facts

Board numberDA0X3CMBAF0
Designed byQuanta
RevisionsF
First seen2022-09-24
Source channelsBIOS Archive
About the numberQuanta board numbers follow the pattern DA + project code + MB + suffix, where the second-to-last letter is the PCB revision.

Laptops that use DA0X3CMBAF0

  • HP TPN-Q250

What these files are for

A BIOS dump is a full image of the board's SPI flash chip. It is written back with an SPI programmer when the original firmware is corrupted, after a chip replacement, or to recover from a failed update. Read and save the original chip first: serial number, DMI data and the Intel ME / AMD PSP state differ between boards.

EC (embedded controller) firmware runs the keyboard controller, power sequencing, battery charging and fans. Depending on the board it lives in a separate chip (ENE KB9012, ITE IT85xx, Nuvoton NPCE) or inside the main SPI image, so check which applies before flashing.

Tools to open these files

FormatWhat it isOpen with
.rarRAR archive7-Zip or WinRAR
.binBIOS image inside the archive (usually .bin)a CH341A, XGecu T48 / TL866II Plus or RT809H programmer

Questions

Which laptops use the DA0X3CMBAF0 board?

Files in the catalog link DA0X3CMBAF0 to the HP TPN-Q250.

Who designed the DA0X3CMBAF0 board?

DA0X3CMBAF0 is a Quanta board number used by HP.

Where do the download links go?

Each button opens the original public Telegram post the file was shared in. ChambersDesignInc.com only indexes and cross-references those posts.